CT11A-Gold: The waterproofing agent is synthesized from Acrylonitrile and Alkylsiloxane.
CT11A-Gold: Has the effect of preventing water penetration from the outside, but the surface still evaporates easily.
CT11A-Gold: A water-based liquid product, used to waterproof cement and concrete in the form of a mixture with cement in the ratio 1:1.
CT11A-Gold: Waterproofing agent suitable for concrete, foundation, cement walls such as: tunnels, water tanks, swimming pools, terraces, floors, walls, seños, toilet floors... Sustainability Tested in high-rise buildings in the US for over 15 years, the quality is still good.
CT11A-Gold: Non-flammable, non-toxic, free of lead, mercury and other harmful substances. Safe for operators and users.
HOW TO USE:
Surface preparation:
Cement and concrete foundation must be sufficiently marked, not peeling. Absolutely remove moss, old paint, grease, chalk dust and weathered cement layers.
For walls, the new foundation needs to wait at least 21 days for the cement structure to stabilize, then proceed to paint CT11A-Gold.
To ensure good adhesion and low consumption of CT11A-Gold, it is necessary to pre-wet the construction surface by using a roller with 01-02 layers of clean water before using CT11A-Gold.
Construction:
Prepare a mixture of CT11A-Gold and high-grade Portland cement (grade 400 or higher) in the ratio 1:1 (01kg CT11A-Gold with 01kg of cement and a sufficient amount of water to ensure the finished cement). viscous form).
Mix cement with water, stir until smooth, then mix with CT11A-Gold and stir again.
Using a brush, rulo applied 2-3 layers of the above mixture. Each coat is 6-8 hours apart, let CT11A-Gold dry for 1-2 days before applying other coats.
The hardness CT11A-Gold reaches absolute after 7 days.
Note:
CT11A-Gold is subject to slight back pressure during 3-layer scanning.
If the construction surface has cracks, it is necessary to use CT-14 elastic waterproofing agent.
If CT11A-Gold has been mixed with cement, it must be used within 1 hour, because after that time the product will harden. Use where to mix cement there.
Norm: 2.0-2.5 m2/kg, depending on the surface of the material.
Cleaning tools: Use soap and clean water to wash normally.
Storage: Store in a cool, dry place. Seal when not used up and not mixed with cement.
Packing: 1kg/bottle, 4kg and 20kg/carton.
